Best Desoldering Wick in 2022 [*Detailed Reviews*]

  • by

Looking for the best desoldering wick available? We’ve got you covered. Check out the ratings of absolute bestsellers below and make a final decision.

802 Reviews Scanned

SaleBestseller No. 1
Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Removal Tool Solder Sucker 1 piece Desoldering Wick Wire Roll and Disassemble Electrical Components
  • 🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
  • 🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
  • 🌟This desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 🌟The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • 🌟The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
Bestseller No. 2
NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Available with standard or anti-static bobbins
Bestseller No. 3
Herain No-Clean Solder Wick, Desoldering Braided Wicks with Flux, Desoldering Wicks Removal Tool Solder Sucker Used to Remove the Solder and Disassemble Electrical Components(9.84 ft Length) (1)
  • 1.High-quality materials: The desoldering wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption.
  • 2.Geometric braid design: The solder wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.
  • 3.Widely used: No-clean desoldering wick is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder.
  • 4.Easy to use: The desoldering braid wick is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station.
  • 5.Ingenuity quality: 1 piece of no-clean solder braided wick (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time.
Bestseller No. 4
TOWOT Desolding Pump & 2PCS Desoldering Wick (Length: 1.5m; Width: 2.5mm) Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid
  • Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand.
  • 3-in-1 Solder Set: 2 PCS copper solder braid is made of copper and rosin geometrically accurate braiding, when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (length: 1.5m; width: 2.5mm), Suction Pump Size (length: 21cm).
  • High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable.
  • Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs.
  • Value Package: 3-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!
Bestseller No. 5
TOWOT No-Clean Solder Wick, 10ft Length Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components, Solder Wick Braid(W 0.08'' L 12')
  • Quality materials:The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
  • Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
  • Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
  • Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
  • Warranty :If you have any questions, please feel free to contact us at any time. Thank you!
Bestseller No. 6
MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width 3 Meter Length
  • ❤ Package Include - You will get 1 pack No-Clean Solder Braided Wicks.The color of the label is random.
  • ❤ Appropriate Size - The size of the solder wick is 2.5mm x 3m / 0.1inch x 10 ft.
  • ❤ Premium Material - The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder.
  • ❤ Solder Braided Wicks - The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time.
  • ❤ Applicable Occasions - The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.
Bestseller No. 7
AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool
  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
Bestseller No. 8
Hotop 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Multi-color,1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm)
  • What you get: come with 6 pieces of no-clean solder wicks in different size, including 0.04 inch, 0.05 inch, 0.07 inch, 0.1 inch, 0.12 inch, 0.14 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
Bestseller No. 9
MG Chemicals 426 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5' Length x 0.1" Width, Blue
  • Oxide-free clean copper
  • Static free bobbins
  • Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
  • Manufactured under SPC guidelines
  • Designed to leave a residue that is environmentally safe
Bestseller No. 10
Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10", 50ft.
  • Ultra-thin desoldering wick
  • Responds as much as 50% faster than conventional desoldering braids
  • Lighter mass and pure copper braid construction
  • Better thermal conductivity, even at low temperatures
  • Overheating minimized by requiring less heat for shorter time

Choosing the Best Desoldering Wick: Tips Buying Guide

Laying your hands on the best desoldering wick comes with ebbs and flows. It’s natural, for finding a quality desoldering wick (just like any other product) suggests browsing through tons of item specifications, customer reviews, price variations, warranty details, and desoldering wick ratings.

Also read 👉 Books On Playwriting Review

If you’re still on the fence about what desoldering wick to buy, this desoldering wick buying guide might be right up your street. Here, we let you in on how we compile our best-rated desoldering wick roundups and reveal the criteria we take into account.

Now, when shopping for the top desoldering wick, some of the following questions probably linger through your mind:

  • How much money am I ready to spend on it?
  • What should I look for in a desoldering wick to stick with the best one?
  • Who makes the best desoldering wick?
  • What are the pros and cons of the specific product that has caught my eye?
  • What are the warranty details?
  • Do I trust this particular manufacturer/seller?

No doubt, your questions about the product you’re interested in don’t end there. And that’s nothing but good. If you have extra time for researching under your own steam, then make the most of it.

Also read 👉 Concealed Carry Holster For Glock 23 Review

If you don’t, then you can always trust our reviews. Read on for more info on how to succeed in investigating the product you like, without any extra assistance.

Read Desoldering Wick Reviews Conduct Your Own Analysis

If you’re a responsible buyer and you don’t like wasting your money on worthless stuff, you tend to invest your time and effort in conducting your own research on the product you’re interested in prior to making a purchase.

You research customer testimonials, Google product information, evaluate the benefits and drawbacks of the item(s) you fancy, while taking their more affordable alternatives into consideration.

When learning as much as you can about the product you want to buy, you will want to focus on the most reliable sources of information. Here are a few tips on getting the most trusted details about the item(s) you’re currently shopping for:

  • read a lot of reviews;
  • compare desoldering wick reviews;
  • analyze those reviews and bear in mind that some of them might not be as independent (read as trustworthy) as they sound;
  • watch video reviews featuring the product you’re focused on purchasing, see it in action, do your best to make your
  • own conclusions whenever possible.

How We Rate Each Desoldering Wick

Now, if you have no time (or lack in-depth expert knowledge) for researching all the technical details and customer rating info about the item(s) you’re looking to buy, feel free to turn to our assistance. We analyze each product based on multiple expert criteria prior to sharing our experience-backed opinion on it.

Also read 👉 Fly Fishing Books For Beginners Review

So, when preparing our reviews, we focus on the following major factors:

  • desoldering wick brand’s reliability and reputation;
  • the features and specs of a product;
  • overall product quality and durability;
  • the product’s benefits and drawbacks;
  • other customer reviews and ratings;
  • video reviews and maintenance specifics.

You can always trust our product reviews, as we only publish them after profound and extensive testing sessions. We aim to be as objective as possible, for we appreciate our reputation and want to be the best in our field, helping our readers make the right choice.

Also read 👉 Headphones With Detachable Cable Review

When it comes to testing and reviewing a variety of products, our algorithms are analyzing thousands of customer reviews each second to find real bestsellers and the highest quality products.

We update our reviews on a regular basis, for we want you to get the most comprehensive and current details out there.

All in all, how we test each desoldering wick and work up our desoldering wick comparison analyses is always about honesty, integrity, independence, and maximum objectivity.

If you have any comments, questions, or suggestions regarding our reviews, you’re welcome to contact us with them ASAP. We value your feedback greatly.

Leave a Reply

Your email address will not be published. Required fields are marked *